Are the fossils in Fossil Beige cobblestones real?

Yes. Every mark is a genuine marine fossil — shell fragments, coral, and other sea-floor remains preserved in the limestone. That's why no two cobblestones match. Mix pieces from several crates as you lay them, so shell-rich and calmer pieces spread evenly across the driveway or path.

Which finish shows the fossils best?

Sawn and honed finishes show the fossils most clearly because the face is flat. A brushed finish raises the hard shells slightly above the surrounding stone, which many people like outdoors. Bush-hammering puts texture first and makes the fossils quieter. Compare free samples of two or three finishes before you choose.

Can limestone cobblestones be used on a driveway?

Yes, for residential driveways. The 4-inch depth spreads vehicle loads, and herringbone locks the pieces together under turning wheels. Use a compacted crushed-stone base 6–8 inches deep, 8 inches under cars, on a geotextile membrane, with edge restraints. For heavy or commercial traffic, send us details and we'll confirm the specification.

How do I deal with oil stains on a pale limestone driveway?

Prevention first: a breathable impregnating sealer keeps oil near the surface, where it cleans off more easily. Wipe fresh drips quickly with absorbent paper, then wash with a stone-safe degreaser. For older stains, apply a poultice made for natural stone. Never use acid cleaners, which etch limestone permanently.

Can Fossil Beige cobblestones stay outside through winter?

In mild and temperate climates, yes. Where hard freezes repeat every winter, limestone needs good drainage, a well-built base, and a maintained sealer to last. Send us your location before ordering and we'll review your project honestly, or suggest basalt for fully exposed sites.

What patterns suit 8″ × 4″ cobblestones?

Herringbone, at 45 or 90 degrees, is the strongest choice for driveways. Running bond gives calm, straight lines for paths. Two cobblestones side by side make an 8-inch square for basketweave. A soldier course — a border of cobblestones set side by side at right angles to the edge — frames any pattern neatly.

Cream cobblestone pavers in a herringbone pattern styled with a copper watering can and flowers

Beige cobblestones with a fossilized texture in a herringbone patio styled with flowers and a watering can

Single cream cobblestone paver with a natural fossilized texture and clean-cut edges

Cream cobblestone pavers with a fossilized texture on a curved driveway leading to a home

Cream cobblestone pavers with a fossilized texture on a curving driveway lined with palm trees

Beige-cream limestone cobblestone pavers with a fossilized texture bordering a grass edge

Beige cobblestone pavers in a herringbone pattern forming a driveway with a concrete border

Beige cobblestone pavers with a fossilized texture in a herringbone pattern bordering grass

Beige cobblestone pavers with a fossilized texture in a herringbone driveway with soldier-course border

Beige cobblestone pavers with a fossilized texture and soldier-course border next to grass

Beige-cream limestone cobblestone pavers with a fossilized texture bordering a mossy lawn edge

Beige-cream limestone cobblestone pavers with a fossilized texture forming a herringbone garden path

Beige-cream limestone cobblestone pavers with a fossilized texture bordering a grassy lawn edge

Quarry-Direct · Middle East Natural Stone

Fossil Beige Limestone Cobblestone Pavers

Name: Fossil Beige Limestone Cobblestone Pavers | Citadel Stone
Brand: Citadel Stone
Price: 3.20 USD

$3.20

Fossil Beige limestone cobblestones carry real shell and coral fossils in a beige-to-cream stone. Standard size 8″ × 4″ × 4″, with any size or finish cut to order, for driveways, garden paths, courtyards, and pool surrounds. Quarry-direct, with free samples so you can compare finishes first.

Price: $3.20 per sq. ft.

Enter area (sq. ft.):

Total: $3.20

Your size. Your thickness. Your finish, confirmed for this stone.

We cut this stone to the dimensions and thickness your project calls for. Brushed is our signature finish, from a coarse 16 grit to a fine 80, or finer to order. Most of our limestone and basalt can also be supplied sawn, honed or bush-hammered; polished, tumbled and split-face are made on selected stones. Tell us the size, thickness, finish and use, and we’ll confirm what this stone can be made in. Looking for another color? See the full collection.

Planning a laying pattern? See which of our formats suit herringbone, French pattern, running bond, stack bond, basketweave and fan layouts in our paver laying patterns guide.

Ships by pallet or container to any US state · Lead time quoted per order

Suitability

Floors, patios & terraces
External use (from 20 mm thickness)
Walls, cladding & facades
Pool surrounds & wet areas
Driveways (30 mm+ setts and pavers)
Steps, copings & edging

Suitability varies with size, thickness, finish, and substrate. Tell us your application when you request a quote and we will confirm the right specification for it.

Installation Information

Bedding: full-bed sand and cement mix or a flexible adhesive appropriate to the substrate.
Joints: from 3 mm for sawn tiles; wider for split-face setts and cobbles.
Sealing: a quality impregnating sealer is recommended for limestone and shellstone; basalt and granite typically need none.
Cutting: wet saw with a diamond blade.

Installation requirements differ by stone and format — a product-specific method note is included with every quote, and our team is available for your installer’s technical questions.

Volume & Trade Pricing

Pricing improves materially with quantity: pallet rates beat per-piece pricing, and full-container rates beat both. Every quote is calculated quarry-direct, with no distributor margin in between.

Distributors, stone yards, and retailers: our Trade & Wholesale Program covers container-load pricing, recurring supply schedules, and private-label production.

Delivery

Orders ship by pallet or full container to any US state, with kerbside delivery to the nearest safe access point. Lead times depend on stone, finish, and quantity, and are confirmed with your quote. Samples reach any US address within five working days.

Every crate is inspected and photographed before dispatch — if anything is wrong on arrival, contact us and we will make it right.

Fossil Beige Limestone Cobblestones — Real Fossils, Any Finish

Fossil Beige is a beige-to-cream limestone full of real marine fossils: shell fragments, coral, and other remains of an ancient sea floor. As cobblestones, it brings that detail to driveways, garden paths, and courtyards. Our standard size is 8″ × 4″ × 4″ (20 × 10 × 10 cm). We cut any size and any finish to order.

The Fossils Are Real

Every mark in the stone is a fossil, not a printed pattern, so no two cobblestones look alike. Some pieces are rich with shells; others are calmer. Draw from several crates while laying, and the fossils spread evenly across the area.

How the Finish Changes the Fossils

The finish decides how much fossil detail you see. You can compare them in close-up photos on our stone finishes page.

Sawn and honed: flat faces that show the fossils most clearly. Best for paths, terraces, and courtyards.
Brushed (16 to 80 grit): the brush wears the softer stone faster than the hard shells, so the fossils stand slightly proud. Coarser grits give more grip.
Bush-hammered: an even, pitted texture with high grip; the fossils become a quieter background.
Tumbled and split-face: made on selected stones. Ask us and we’ll confirm them for Fossil Beige.

Where It Works

Driveways and entrance aprons
Garden paths, walkways, and courtyards
Pool surrounds, where the pale stone stays much cooler than dark paving
Borders, edging, and lawn edges
Covered porches and garden rooms

Limestone Under Cars

Limestone is softer than basalt, but at 4 inches deep these cobblestones handle residential driveways when laid on a proper base (see the FAQ below). For heavy or commercial traffic, send us the details and we’ll confirm the thickness and build-up.

Care and Stains

Seal the cobblestones after installation with a breathable impregnating sealer, and renew it on the maker’s schedule. It makes oil drips and tire marks far easier to remove. Acid cleaners are never safe on limestone.

Sizes and Ordering

Every size and thickness is cut to order: cobblestones, cubes, borders, and matching Fossil Beige pavers and tiles. Fossil Beige is quarried in the Middle East, quarry-direct and hand-selected, and is delivered by pallet or container across the US and abroad. Browse all our limestone cobblestones, and order free samples in two or three finishes to see how each one shows the fossils.

Specifications

Stone type: Fossil-rich limestone
Color: Beige to cream with real shell and coral fossils
Format: Cobblestones — standard 8″ × 4″ × 4″ (20 × 10 × 10 cm)
Other sizes: Any size and thickness cut to order
Finishes: Sawn, honed, brushed (16–80 grit, finer to order), bush-hammered; tumbled and split-face confirmed on request
Fossil visibility: Clearest on sawn and honed; slightly raised on brushed; quieter on bush-hammered
Coverage: About 4.5 pieces per sq ft (≈50 per m²) laid tight, before joints
Best for: Driveways, garden paths, courtyards, pool surrounds, borders
Driveway base: 6–8″ compacted crushed stone over geotextile; 8″ minimum under vehicles
Sealing: Breathable impregnating sealer, renewed on the maker’s schedule
Hard-freeze regions: Confirmed per project
Origin: Middle East — quarry-direct, hand-selected

Real photography of the actual stone

Choose Your Finish with Confidence

The finish decides how your stone looks, feels and grips underfoot. Compare every finish we produce — brushed 16, 36 and 80 grit, honed and bush-hammered — photographed up close on the actual stone we supply, so you can judge the texture before you order. Samples of any finish are at your door within 3 working days.

Explore the Stone Finishes Gallery